Loading...

Ignition Relay | Crusader 98175 - MacombMarineParts.com

Ignition Relay | Crusader 98175

  • $61.14
    Unit price per 

Only 14 left!

Ignition Relay | Crusader 98175

Crusader Ignition Relay | Crusader 98175

Crusader throttle body injected marine engines Ignition relay.

  • Relay has 5 connection terminals
  • TB350XL/TB350HT engines with serial number range 90232 & up
  • TB454XL engines with serial number range 92882 to 103848
  • TB502XL engines with serial number rangel 94268 & up
  • Original Crusader

Frequent Asked Questions 

With today’s rising gasoline prices, what octane rating is recommended for Crusader engines?
  • Crusader fuel injected engines are calibrated to operate on 87 octane fuel and maximum performance is obtained when using this fuel. The ignition timing set by the factory requires the use of a high-quality lead free regular gasoline.
What kind of oil should be used in Crusader engines?
  • When the average temperature is above 50 degrees fahrenheit, use a good quality SAE 15W-40 “SJ”. Below 50 degress fahrenheit, use SAE 5W-30 “SJ”.
  • Synthetic oils are not recommended for use in Crusader engines. 
What is Crusader's policy on the use of Ethanol?
  • This notification addresses the use of ethanol fuels IN CRUSADER ENGINES ONLY. It does not address the use of ethanol fuels in vessel related components such as boat gas tanks, boat fuel lines, boat fuel filters, etc. The boat owner is STRONGLY ENCOURAGED to contact the boat builder regarding the suitability of ethanol fuel usage in their vessel.
  • Blended ethanol fuel rated E10 or less is acceptable to use.
  • Fuels rated higher than E10 SHOULD NOT BE USED.
  • Ethanol fuels rated higher than E10 could potentially damage the engine and/or present an unsafe boating condition. Damage to the engine resulting from the use of ethanol fuel rated higher than E10 is not covered by the warranty.
Type of coolant should be used in Crusader engines?
 
Crusader recommends DEX-COOL or any good extended life coolant (pink/orange in color) mixed 50% DEX-COOL to 50% water for engines that have a closed cooling system. More than 50% coolant can contribute to overheating. Do not mix or substitute DEX-COOL with traditional silicated coolant (green in color).

We Also Recommend