Protect your order from Loss or Damage
Crusader Model V-6 262 C.I.D/4.3 Litre - Intake Manifold Assembly

Ref # | Part # | Description | 262 | |
RH | LH | |||
1 | 20806 | Hose, 5/3" X 12" Long | 2 | 2 |
2 | 97915 | Decal, Flame Arrestor | 1 | 1 |
3 | 20231 | Elastic Stop Nut, 114 - 20 | 1 | 1 |
4 | 103339 | Washer, 1/4 Flat | 1 | 1 |
5 | 97595 | Flame Arrestor Dual Vent | 1 | 1 |
6 | 96926 | Stud 114 - 20 x 33/4 " | 1 | 1 |
7 | 102634 | Nut 5/16 - 18 Hex | 4 | 4 |
8 | 103320 | Washer, 5/16 Medium Lock | 5 | 5 |
9 | 103340 | Washer, 5/16 Flat | 4 | 4 |
10 | 96818 | Stud Carburetor 5/16- 18 x 4114",0° Stud | 2 | 2 |
11 | 96817 | Stud, Carburetor 5/16- 18 x 2114",12° Installation | 2 | 2 |
12 | 97948 | Bolt, Distributor Hold Down | 1 | 1 |
13 | 20799 | Clamp, Distributor Hold Down | 1 | 1 |
14 | 41081 | Distributor Assembly | 1 | 1 |
15 | 273513 | Screw & Washer Assembly - Choke | 1 | 1 |
16 | 30123 | Choke Clip | 1 | 1 |
17 | 33240 | Automatic Choke Assembly | 1 | 1 |
18 | 97831 | Fuel Line - Pump to Carburetor | 1 | 1 |
19 | 45356 | Carburetor - 4 BBL | 1 | 1 |
20 | 22410 | Tie Wrap | 2 | 2 |
21 | 22580 | Tygon Tubing 3/8" O,D, x 1/4" I,D, 30" Long | 1 | 1 |
22 | 21025 | Ball Joint Single Station | 1 | 1 |
23 | 97033 | Gasket, 4 BBL Carburetor Mounting | 1 | 1 |
23 | >97826 | Gasket, 4 BBL Carburetor Mounting | 1 | 1 |
24 | 97122 | Wedge Plate | 1 | 1 |
25 | 186628 | Bolt, 3/8- 16 x 1 1/2" Hex Cap (GR 8) | 2 | 2 |
26 | 96845 | Lifting Ring | 2 | 2 |
27 | 97830 | Fuel Line - Filter to Pump | 1 | 1 |
28 | 179822 | Bolt, 5/16 - 18 x 1 1/2" Hex HD (GR 5) | 2 | 2 |
29 | 30573 | Elbow; Inverted Flare, 3/8" Tube to 1/4 " Pipe 90° | 1 | 1 |
30 | 97827 | Fuel Pump, Carter | 1 | 1 |
31 | 97660 | Reducing Bushing Fuel Pump | 1 | 1 |
32 | 91340 | Gasket, Fuel Pump Mtg | 1 | 1 |
33 | 33385 | Plate, Fuel Pump Mtg | 1 | 1 |
34 | 33384 | Gasket, Fuel Pump Mtg Plate | 1 | 1 |
35 | 33386 | Rod Fuel Pump Push (Engine Serial Number Prior to 64788) Steel | 1 | 1 |
35 | 33694 | Rod Fuel Pump Push (Engine Serial Number After 64788) Cast Iron | 1 | 1 |
36 | 20790 | Screw with Lock Washer 1/4 - 20 x 3/8 " | 2 | 2 |
37 | 12034 | Nut; #10 - 24 Zinc Plated Hex | 2 | 2 |
38 | 106497 | Washer, #10 Medium Lock | 2 | 2 |
39 | 96683 | Throttle Bracket | 1 | 1 |
40 | 97280 | Plate, Throttle Control | 1 | 1 |
41 | 443874 | Screw; 10- 24 x 11/2" Hex HD (Machine) | 2 | 2 |
42 | 21033 | Clip, Shift Cable, Single Control | 1 | 1 |
43 | 97889 | Filter Fuel Assembly | 1 | 1 |
44 | 91606 | Cartridge, Fuel Filter | 1 | 1 |
45 | 179845 | Bolt 3/8- 16 x 13/4" Hex HD (GR 5) | 2 | 2 |
46 | 103321 | Washer 3/8 Medium Lock | 2 | 2 |
47 | 30572 | Connector Inverted Flare, 3/8 Tube to 1/4 Pipe, Male | ||
48 | 97820 | Bracket-Fuel Filter | 1 | 1 |
49 | 181339 | Bolt 5/16 - 24 x 1" Hex HD (GR5) | 2 | 2 |
50 | 700427 | Sender Water Temperature Single Station | 1 | 1 |
50 | 727046 | Sender Water Temperature Dual Station | 1 | 1 |
51 | 33595 | Intake Manifold | 1 | 1 |
52 | 33393 | Intake Gasket Set | 1 | 1 |
53 | 33397 | Gasket Distributor Mounting | 1 | 1 |
54 | 97829 | Hose Adapter, Quad Jet | ||
55 | 33505 | Carburetor Isolator Gasket | 1 | 1 |
56 | 179841 | Bolt, 3/8- 16 x 1 1/4" | 4 | 4 |
56 | 33700 | Bolt, 3/8- 16 x 1 1/8" | 8 | 8 |
57 | 20790 | Screw to Lock Washer Assembly, 1/4- 20 x 3/8" | 1 | 1 |